28mm Twintec Filling Hose Upgrade

The Twintec hose material has been upgraded to be more robust and hard wearing and new part numbers created to include the red cap design. 

TAP 24 – Reinforced Vacuum Hose

As part of Numatic International’s commitment to product support and machine upgrades we have upgraded hoses to a new more robust design. The stretch hoses have changed material from PVC (Polyvinyl Chloride) to a PU (Polyurethane) which gives greater resistance to damage. The Suction and Vacuum hose now have an additional membrane and wire insert […]

TAP 22 – Angled Hose Cuff Upgrade

As part of Numatic International’s commitment to product support and machine upgrades we have a new angled hose which fits onto the floor tool. This new design prevents any potential damage to the hose which could be caused by the extra weight brush pedal when the floor tool is fully to the right. This can […]

TAP 21 – Foam Reduction Kits

As part of Numatic International’s commitment to product support and machine upgrades we have produced two new foam reduction kits which can be retrofitted to earlier models. The kit ensures the float switch will engage more promptly when using a high foaming detergent. The float switch will shut off the vacuum motor before large amounts […]

TAP 18 – Drive Wheel Update

As part of Numatic International’s commitment to product support and machine upgrades we have improved the drive wheel from the 206727 200MM DIA X 50MM WIDE WHEEL Aluminium cast style wheel to a black plastic moulded with a PU (Polyurethane) tread. This new design removes the current problem of corrosion and the associated problems this […]

TAP 16 – Twintec Rear Castors Update

As part of Numatic International’s commitment to product support and machine upgrades we have improved the rear castors on our Twintec range. The new castor is more robust in design and has an extended life due to the heavy duty construction when compared to the old version.

TAP 5 – Twintec Tank Switch Kit

When we designed the TTV 5565 followed by the TTV 4555, TTB 6055 and TTB 6055T we added a small microswitch between the top and bottom tanks. The purpose of this switch was to prevent the machine from operating when the top tank was was raised.