TGB 6055 / 6055T Floor Tool lifting Mechanism Upgrade Kit
As part of Numatic International’s commitment to product support and machine upgrades, we have created a kit to enable you to fit the new improved floor tool lifting mechanism to existing machines in the field.
28mm Twintec Filling Hose Upgrade
The Twintec hose material has been upgraded to be more robust and hard wearing and new part numbers created to include the red cap design.
Nuplex HD Longlife Power Pad Care Guide
To get the best out of your Nuplex Pad follow these simple instructions before and after every use.
TAP 24 – Reinforced Vacuum Hose
As part of Numatic International’s commitment to product support and machine upgrades we have upgraded hoses to a new more robust design. The stretch hoses have changed material from PVC (Polyvinyl Chloride) to a PU (Polyurethane) which gives greater resistance to damage. The Suction and Vacuum hose now have an additional membrane and wire insert […]
TAP 22 – Angled Hose Cuff Upgrade
As part of Numatic International’s commitment to product support and machine upgrades we have a new angled hose which fits onto the floor tool. This new design prevents any potential damage to the hose which could be caused by the extra weight brush pedal when the floor tool is fully to the right. This can […]
TAP 21 – Foam Reduction Kits
As part of Numatic International’s commitment to product support and machine upgrades we have produced two new foam reduction kits which can be retrofitted to earlier models. The kit ensures the float switch will engage more promptly when using a high foaming detergent. The float switch will shut off the vacuum motor before large amounts […]
TAP 16 – Twintec Rear Castors Update
As part of Numatic International’s commitment to product support and machine upgrades we have improved the rear castors on our Twintec range. The new castor is more robust in design and has an extended life due to the heavy duty construction when compared to the old version.
TAP 5 – Twintec Tank Switch Kit
When we designed the TTV 5565 followed by the TTV 4555, TTB 6055 and TTB 6055T we added a small microswitch between the top and bottom tanks. The purpose of this switch was to prevent the machine from operating when the top tank was was raised.